1. Home/
  2. AC and Heating Equipment/
  3. Split System-Ducted/
  4. HVAC Systems/
  5. Arcoaire AC Single Phase Split System Deluxe Multi Stg 4 Ton 60k BTU AHU 16 SEER2
  View Compare ( 0 )
Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Multi Stg 4 Ton 60k BTU AHU 16 SEER2

Arcoaire AC Single Phase Split System Deluxe Multi Stg 4 Ton 60k BTU AHU 16 SEER2
View Inventory
Kit Includes Copper Fittings/Adapters, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, PVC Ptrap Kit, Furnace Leveler, whip 6' 3/4" 8GA, No Vent Caps, 2" Plastic Pad, 2H/2C Thermostat
Add to Cart
Regional Add to Job List

This retail set contains

Add to Cart
Regional Add to Job List
Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Multi Stg 4 Ton 60k BTU AHU 16 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Includes:
H4A7T48AKAWA, FCM4X6000AL, ACBKIT10
Nominal Capacity (BTUH):
48000
Cooling Efficiency (EER2):
13
Cooling Efficiency (SEER2):
16
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
AHU
System Outdoor Type:
Multi Stage
System Coil Configuration:
Multi Position
System AHU Type:
Variable Speed
System Nominal Tons:
4.0 Ton
AHRI System Number:
211793431
A/C, Single Phase, Split AHU Multi Stage, Multi Position H4A7T/FCM4X

Air Conditioner Condenser
  • 2 Stage Copeland Scroll Ultratech Compressor
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Thermal Overload

Multi Position Fan Coil

  • Smart Diagnostics
  • Factory installed TXV metering device
  • Variable Speed EC motor
  • Supports 2 Stage Outdoor Units
  • Dehumidification Mode
  • Heat Pump Comfort/Efficiency Options
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • Variable speed EC Motor operates efficiently at all speeds
  • Ultra-low power consumption during fan only operation
  • Meets requirements of a 2% cabinet leakage rate when tested at 1.0 in wc of static pressure
  • Minimal standing water - less microbial growth for improved IAQ and reduced condensate line clogging and related condensate leakage
  • Tested for condensate disposal at conditions much more severe than those required by AHRI • Primary and secondary drain connections to comply with HUD
  • All pans constructed of an injection molded glass-filled polycarbonate engineered resin material, with brass drain connections.
  • Easy 4 wire hook up: reduces installation time
  • Multi-position installation
  • Modluar cabinet on 5 ton model
  • 5kw - 30kw Heat Kits Available